SMC7904BRA3 User Manual
Item Usage
Power On/Off.
Power Power connector. DC 12 Voltage/1000mA, female pole is positive.
1.4 System Requirements
Make sure first that you have prepared these following items to guarantee the ROUTER can work normally.
z Services subscriptions
z An 10BaseT/100BaseT Ethernet card installed on your PC
z HUB or Switch. (Attached to several PCs through one of Ethernet interfaces on the device)
z Operation system: Windows 98SE, Windows 2000, Windows ME, or Windows XP
z Internet Explorer V5.0 or higher, or Netscape V4.0 or higher, or FireFox 1.5 or higher.
1.5 Features
z Supports various line modes
z Supports external PPPoE dial-up access
z Supports internal PPPoE/PPPoA dial-up access
z Supports leased line mode
z Supports ZIPB (Zero Installation PPP Bridge Mode)
z Supports 1483B/1483R/MER access
z Supports multiple PVCs (eight at most) and these PVCs can be isolated from each other
z Support a single PVC with multiple sessions
z Support multiple PVCs with multiple sessions
z Supports the binding of the ports and the PVCs
z Supports the 802.1Q and 802.1P protocol
z Supports DHCP server
z Supports NAT/NAPT
z Supports static route
z Supports firmware upgrade: WEB/TFTP note 1/FTP
z Supports reset to factory default: reset, Web
z Supports DNS relay
z Supports Virtual server
z Supports DMZ functions
z Supports two-level passwords and usernames
3