SMC7904BRA3 User Manual
Fig 3.5.1-1
Label Description
Current ATM VC Table This table shows the PVCs already existed. It shows the Interface name,
Channel Mode, VPI/VCI, Encapsulation mode, local IP Address, Remote
IP address, etc. The maximum item of this table is eight.
VPI (Virtual Path Identifier) The virtual path between two points in an ATM
network, and its valid value is from 0 to 255
VCI The virtual channel between two points in an ATM network, ranging from
32 to 65535 (1 to 31 are reserved for known protocols)
Encapsulation Choices are LLC and VC-Mux.
Channel Mode There are five choices: 1483 Bridged, 1483 MER, PPPoE, PPPoA and
1483 Routed.
Admin Status If select Disable, this PVC is unavailable.
Enable NAPT Select it to enable the NAPT functions of the MODEM. If you are not to
enable NAPT and intend the user of the MODEM to access the Internet
normally, you must add a route on the uplink equipment; otherwise the
access to the Internet fails. Normally, it is required to enable NAPT.
PPP Settings -
Login Name The correct user name that your ISP has provided to you.
Password The correct password that your ISP has provided to you
Connection Type The choices are Continuous, Connect on Demand and Manual.
Idle Time (min) If select Connect on Demand, you need to input the idle timeout time.
Within the preset minutes, if the Modem does not detect the flow of the
user continuously, the Modem automatically disconnects the PPPOE
connection.
26