Appendix C Specifications | SMC Networks SMC8624T guide

APPENDIX C

SPECIFICATIONS

Physical Characteristics

Ports

20 10//100/1000BASE-T, with auto-negotiation

Four 10/100/1000BASE-T shared with four SFP transceiver slots

Network Interface

10BASE-T: RJ-45 (100-ohm, UTP cable; Categories 3, 4, 5)

100BASE-TX: RJ-45 (100-ohm, UTP cable; Category 5)

1000BASE-T: RJ-45 (100-ohm Category 5 or 5e UTP or STP cable) RJ-45 connector, auto MDI/MDI-X

Buffer Architecture

2 Mbytes per system

Switching Database

32 K MAC address entries

LEDs

System: Power, RPU, Diag.,

Port: Link/Act., FDX

Weight

4.36 kg (9.5 lbs)

Size

44.0 x 35.4 x 4.3 cm (17.37 x 13.9 x 1.7 in.)

Temperature

Operating: 0 to 50 °C (32 to 122 °F)

Storage: -40 to 70 °C (-40 to 158 °F)

C-1

Image 59

SMC Networks SMC8624T manual Appendix C Specifications, Physical Characteristics

Contents

TigerSwitch 10/100/1000 Page TigerSwitch 10/100/1000 Installation Guide Trademarks Limited Warranty Limited Warranty Iii CompliancesFCC Class a EC Conformance Declaration Class a Compliances Industry Canada Class a Underwriters Laboratories Compliance Statement Safety ComplianceWarnhinweis Faseroptikanschlüsse Optische Sicherheit Wichtige Sicherheitshinweise Germany Vii Viii Contents Making Network Connections Appendices Xii Overview Chapter About Management Options Switch ArchitectureSwitching Method VLANs Spanning Tree Protocol Traffic Priority Multicast Switching SFP Slots Description of Hardware1000BASE-T Ports Port and System LEDs Status LEDs System Status LEDs Power Supply Receptacles Optional Redundant Power Unit Connectivity Features and Benefits Performance Management About the Tigerswitch 10/100/1000 Chapter Network Planning Introduction to Switching Collapsed Backbone Sample Applications Central Wiring Closet Central Wiring Closet Remote Connections with Fiber Cable Collapsed Backbone Using Fiber Cable Making Vlan Connections Making Vlan Connections Mbps Gigabit Ethernet Collision Domain Connectivity Rules SMC 2-1 Rule for Class I Repeaters Mbps Fast Ethernet Collision DomainMaximum Fast Ethernet Cable Distance SMC 3-2 Rule for Class II Repeaters SMC 5-4-3 Rule Maximum Network Diameter Using RepeatersMbps Ethernet Collision Domain Maximum Ethernet Cable Distance Application Notes Network Planning Selecting a Site Installing the Switch Optional Rack-Mounting Equipment Equipment ChecklistPackage Contents Rack Mounting Mounting Attaching the Brackets Attaching the Adhesive Feet Desktop or Shelf Mounting Power Receptacle Connecting to a Power Source Cabling Guidelines Connecting Network DevicesChapter Making Network Connections Twisted-Pair Devices Making Twisted-Pair Connections Connecting to PCs, Servers, Hubs and Switches Wiring Closet Connections Wiring Closet Connections Making Network Connections Power and Cooling Problems Appendix a TroubleshootingDiagnosing Switch Indicators In-Band Access Installation Appendix B Cables Specifications Twisted-Pair Cable and Pin Assignments Figure B-1. RJ-45 Connector Pin Numbers RJ-45 Pin Assignments 100BASE-TX/10BASE-T Pin Assignments 1000BASE-T Pin Assignments Pin MDI Signal Name MDI-X Signal Name 1000BASE-T Cable Requirements Cable Testing for Existing Category 5 CableAdjusting Existing Category 5 Cabling to Run 1000BASE-T Console Port to 9-Pin COM Port on PC Console Port Pin AssignmentsDB-9 Port Pin Assignments Console Port to 25-Pin DTE Port on PC Cables Physical Characteristics Appendix C Specifications AC Input Power SupplyPower Consumption Humidity Switch Features Standards Management Features CE Mark Emissions WarrantySafety Compliances Specifications Appendix D Ordering Information Ordering Information Auto-Negotiation GlossaryGlossary-1 1000BASE-T Glossary-2 Glossary-3 Glossary-4 Virtual LAN Vlan Glossary-5Transmission Control Protocol/Internet Protocol TCP/IP Glossary-6 Index-1 Index Index-2 Index-3 Index-4 Page For Technical SUPPORT, Call