If you have a local client PC that cannot run an Internet application properly from behind the NAT firewall,
then you can open the client up to unrestricted two-way Internet access by defining a Virtual DMZ Host.
The Simple Network Management Protocol (SNMP) lets you manage a computer network remotely by
polling and setting terminal values and monitoring network events.
• Enable SNMP: You can check Local, Remote, or both options to enable the SNMP function.
{ If Local is checked, the router responds only to requests from the LAN.
{ If Remote is checked, the router responds only to requests from the WAN.
• Get Community: Setting this option allows the router respond to a request.
• Set Community: Setting this option allows your router to accept a request.