Configuring Your Gateway
Using the Reboot Menu to Reboot the Gateway One way to reboot the Gateway to the factory default settings is by using the Reset switch
on the Gateway’s rear panel. Another way is to use the Reboot menu.
Note: Rebooting the Gateway keeps any customized overrides you made to the default
settings. To reboot the Gateway and return to the factory-default settings, use the Reset
switch on the rear panel of the Gateway (see page 14).
To access the Reboot menu, click Tools in the menu bar and then click the Reboot
submenu in the menu bar. Figure 36 shows an example of the menu.
Figure 36. Reboot Menu
To reboot the Gateway:
1. In the Reboot menu, click Apply. The precautionary message in Figure 37 appears.
2. Click OK to reboot the Gateway or click Cancel to not reboot it. If you clicked OK, the
reboot is complete when the POWER LED stops blinking.
59
SMCD3GN Wireless Cable Modem Gateway User Manual