SMC Networks SMCWPCI-N2 manual Wps, WPS Setup PBC Push-button Configuration

After advance settings are finished, the following screen is displayed as below.

You can activate the profile now or later.

WPS

Wi-Fi Protected Setup (WPS) is based on push-button or PIN (Personal Identification Number) entry authentication to provide strong WPA/WPA2 encryption keys to client devices. Users can push a button on the access point and the client device to exchange the encryption key. With a PIN, users can enter a code generated by the client device to connect to the network.

WPS Setup - PBC (Push-button Configuration)

1.Push the WPS button on your wireless access point or start WPS standby mode as instructed by the wireless access point user manual.

2.Click the Refresh button on the utility WPS setup page to search for WPS-enabled access points near you. All access points found will be displayed in the WPS AP List.

3.Select an access point on the list and click the PBC button to activate the connection (this may require several seconds to one minute to complete).

26