Smeg 129530 Cleaning and maintenance

129530

• After every drying clean the ﬁ lter, located in the inner part of

the door.

• Lift the ﬁ lter lid (Fig.).

• Pull your ﬁ ngers over the ﬁ lter to remove ﬁ bers and threads

lining. Replace the ﬁ lter cover.

• If necessary, also clean the ﬁ lter housing and door sealing.

Cleaning of the ﬁ lter on the lower side of the door opening

(only with some models)

Before removing clothes from the drum, clean the ﬁ lter on the

lower side of the door opening with a damp cloth or wet hand.

If the ﬁ lter is clogged in such way that it needs washing, pull it

out from its bed (Fig.), wash it under hot water and dry. Be sure

that the replaced ﬁ lter snaps safely to its position, and only then

close the ﬁ lter lid.

If the ﬁ lter is not regularly cleaned, the airﬂ ow is

obstructed, which causes longer drying time and

danger of overheating.

Empty the container and occasionally clean the water

condensation device.

Emptying the water containere

Empty the container after every drying procedure: pull the

container out, pull out the draining nozzle, pour out the water and

replace the container.

Water from condenser tank is not drinkable! If ﬁ ltered it

may be used for ironing.

Strictly switch the appliance off prior cleaning (unplug

the power cord from the wall socket, or turn the

program selector jog to the position “0”).

• Clean the casing and drum interior with soft cloth and mild

detergent.

Cleaning the water condensation device

Clean water condenser two to three times a year. In case of

frequent use of the appliance do it even more often. Certain

Cleaning and maintenance