Smeg A1XCU6 5.1US installation only / 3-wirebranch circuit, Instructions for the Installer

Instructions for the Installer

NOTE: Use this method only if local codes permit connecting cabinet-ground conductor to neutral wire of power supply cord

WARNING

ELECTRIC SHOCK HAZARD

-Turn power supply off before connecting wires.

WARNING - Electrically ground range.

-Failure to follow these instructions can results in death, fire, or electrical

shock.

-Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the power supply cord. If it will not fit the outlet, have a proper outlet installed by a qualifies electrician.

5.1US installation only / 3-wire branch circuit

Refer to picture 1, where local codes allow the connection of ground wire from the applliance to the branch circuit neutral wire (white colored wire):

- The ground wire must be attached first;

- If local codes permit, connect the green or yellow-green ground wire from the appliance and the white wire from the aplliance to the branch circuit neutral wire (white colored wire).

- Connect the red leads from the cooktop to the junction to the corresponding leads in the junction box.

pic.1)

13