Smeg AP361MFN Removing the door, Removing the self-cleaning liners, Instructions for the User

Instructions for the User

10.5.3 Removing the self-cleaning liners

Remove all accessories from the inside of the oven and proceed as follows:

1Remove the side runners (fig.1);

2Extract the side liners “F” and “G” (fig. 2);

3Extract the back liner “A” after undoing the threaded ring-nut “C” (fig. 2);

4Replace the liners in their original positions.

1) 2)

10.6 Removing the door

10.6.1 Removing doors with mobile hinges

With the door completely open, lift the levers A of the two hinges until they touch the hinges B and take hold of the two sides of the door with both hands close to the hinges themselves. Raise the door to an angle of about 45° and remove it. If the hinges have not locked, repeat the operation, raising the levers A and keeping the door slightly raised. To reassemble, fit the hinges B into their grooves, then lower the door into place, ensuring that it remains fitted into the grooves C, then lower the levers A.

50