Instructions for the installer

3. INSTALLING THE APPLIANCE

The appliance must be installed by a qualified technician and according to the regulations in force. Depending on the type of installation, it belongs to class 1 (Fig.A) or to class 2-subclass 1 (Fig.B-C). This appliance may be installed next to a wall which is higher than the appliance, with a minimum distance of 50 mm from the side of the appliance, as shown in drawings A and B relative to the installation classes. Any wall cupboards or ventilation hoods must be at a distance of at least 750 mm above the work surface.

A)

Built-in appliance

B)

Free-standing installation

C)

Appliances equipped with a gas cylinder compartment and electric oven can only be installed as free- standing (see fig. B).

3.1 Wall fixing

In order to avoid the cooker tipping over it must be attached to the wall by means of a chain, as described below:

Horizontally stretch out the chain attached to the cooker

so that the other end touches the wall.

Make a mark on the wall in the position where the hole is to be drilled.

Drill the hole, insert a wall plug and attach the chain.

Move the cooker up against the wall.

7

Page 5
Image 5
Smeg C9GGSSA manual Installing the Appliance, Wall fixing