Instructions for the User
10.7 Secondary menu
This appliance also has a concealed “secondary menu” allowing the user to: Activate or deactivate the child safety device 
.
Activate or deactivate the Showroom mode (which disables all the heating elements so that only the control panel works).
Select or deselect the power limiter mode.
With the PT2 knob positioned on “O”, press the 
and 
buttons for at least 3 seconds to view the secondary menu.
With the 
and 
buttons, it is possible to change the status of the setting (ON / OFF) (HI / LO).
Press 
to move on to setting the next function.
Child
will automatically be locked, indicated by the 
symbol turning on. To disconnect the temporary lock during cooking, hold down the 
button for at least 3 seconds. Two minutes after the last
setting the lock will become active again.
When turning the PT2 knob, the word “BLOC” is shown
permanently. The word only disappears when the knob is turned back to the original start condition.
If the PT1 knob is turned, the cooking temperature will not change and the word “BLOC” will be shown.
Showroom mode: (only for showrooms) by activating this mode, the oven deactivates all the heating elements, while keeping the control panel active. To use the oven normally, set this mode to OFF. During cooking, the word SHO will be displayed (once per minute) to indicate that the showroom mode has been activated.
Power limiter mode: by selecting LO while cooking with the main oven a limited amount of power will be used, according to the model. To reset the product's normal consumption, select HI.
To save the settings, you need to exit from the secondary menu in the “power limiter mode” screen by
pressing the 
key, or else wait for a few seconds.
If you do not do this the changes you made will not be saved.
41
