Instructions for the User
Make sure you only use containers intended for induction cooking, with a thick and completely flat bottom or, if not available, containers without a curved bottom (concave or convex).
YES NO NO
12.5.1Cookware detector signal
Every cooking zone has a "cookware detector" that only starts the cooking if there is a well positioned recipient with the suitable characteristics present on the burner. If the container is not well positioned or is not made of the correct material and still tries to activate the burner, after a few seconds from the
burner's activation, the 
symbol will appear on the display.
12.5.2Residual heat
Each cooking zone is equipped with a residual heat warning device. After any burner is switched off, a
flashing 
may appear on the front zone. This warns that the cooking zone concerned is still very hot.
Cooking can be restarted even while the 
is flashing.
12.5.3Cooking hob lock-out
When not in use, the hob can be “locked” from being accidently turned on by children. With the burners switched off turn the burner knobs 2 and 4 completely to the left until 5 L appears on the display. Then release the knobs. To unlock it repeat the same operation: The burners' displays will show a 0 that will indicate that the burners' lock has been deactivated.
12.5.4Circuit board thermal protection
The appliance is provided with a device that constantly measures the temperature of the electronic circuit board.
If the temperature surpasses certain values, the device will activate certain functions to lower the temperature and allow the
Below is a table with the operations that are activated automatically and the relative start temperature:
50
