Smeg CE9IMX manual Instructions for the User, Cookware detector signal, Residual heat, Operation

Models: CE9IMX

1 27
Download 27 pages 28.54 Kb
Page 21
Image 21
12.5.1 Cookware detector signal

Instructions for the User

Make sure you only use containers intended for induction cooking, with a thick and completely flat bottom or, if not available, containers without a curved bottom (concave or convex).

YES NO NO

12.5.1 Cookware detector signal

Every cooking zone has a cookware detector that only starts the cooking if there is a well positioned recipient with the suitable characteristics present on the plate. If the container is not well positioned or isn't made of the correct material and still tries to activate the burner, after a few seconds from the

burner's activation, the 12.5.2 Residual heat symbol will appear on the display.

12.5.2 Residual heat

Each cooking zone is equipped with a residual heat warning device. After any burner is switched off, a

flashing 12.5.3 Cooking hob lock-out may appear on the front zone. This warns that the cooking zone concerned is still very hot.

Cooking can be restarted even while the 12.5.4 Circuit board thermal protection is flashing.

12.5.3 Cooking hob lock-out

When not in use, the hob can be “locked” from being accidently turned on by children. With the hobs turned off turn the knobs for hobs 2 and 4 completely to the left until 5 L appears on the display. Then release the knobs. To unlock it repeat the same operation: The burners' displays will show a 0 that will indicate that the burners' lock has been deactivated.

12.5.4 Circuit board thermal protection

The appliance is provided with a device that constantly measures the temperature of the electronic circuit board.

If the temperature surpasses certain values, the device will activate certain functions to lower the temperature and allow the glass-ceramic hob to continue to work correctly.

Below is a table with the operations that are activated automatically and the relative start temperature:

Operation

Activating temperature

Fan turns on at low speed

50 °C

Fan turns on at high speed

60 °C

Fan returns to low speed

55 °C

Fan turns off

45 °C

Operating power reduced from Power to 9

76 °C

Reduction of power of a point for every cooking zone

85 °C

Turning off all the cooking zones

90 °C

Switching on again of the cooking zones at reduced power

85 °C

Normal operation of all the cooking zones

80 °C

 

 

Every intervention of this type will be identified on the cooking hob with a light on the power display.

50

Page 21
Image 21
Smeg CE9IMX manual Instructions for the User, Cookware detector signal, Residual heat, Cooking hob lock-out, Operation