Instructions for the installer
6. FINAL OPERATIONS
Having carried out the above adjustments, reassemble the appliance following, backwards, the instructions in paragraph “5.1 Removing the hob”.
6.1Regulation of minimum for natural gas
Replace the components on the burner and slide the knobs on the gas tap pins.
Light the burner and set it at minimum position. Remove the knob and turn the regulation screw inside or next to the gas tap pin (depending on the model) until you get a suitable minimum
flame.
Replace the knob and check burner flame stability: (rapidly turning the knob from maximum to minimum position, the flame should not go out).
6.2 Arrangement of burners on hob
BURNERS
1 Auxiliary
2
3 Rapid
4 Double crown
6.3 Lubrication of gas taps
After a while, the gas tap may become hard to turn or lock. If this happens, it has to be cleaned inside and
This must be done by a qualified technician.
16