Instructions for the Installer
The entire surface of the cut (fig. 2). Now place the 7 brackets supplied to secure the top to the supporting structure. The figures below show how to use these brackets.
The L shaped square as per B in fig. 2 must be fixed to the sides of the work top. After having fixed the hob it is necessary to fix better the shorter sides of the appliance using the screws that are supplied.
Important: when fixing this product to the supporting structure, do not use mechanical or electric screwdrivers and apply only moderate pressure to the fixing components by hand.
Important: when fixing the product, always use the brackets provided in all fixing points.
If this product is installed above an oven, the oven must be fitted with a cooling fan.
Important (only for Ultra Rapid (UR3) burner (4) with raised pan stand): if the appliance is installed on top of a cabinet, a separator shelf must be installed as shown here.
If the appliance is installed on top of a
If the hob is installed above an oven, the oven must be fitted with a cooling fan.
12