Smeg CS71-5 Door glass, Using the self-cleaningliners, 10.3.4Assembling the self-cleaningliners

Models: CS71-5

1 26
Download 26 pages 15.73 Kb
Page 24
Image 24
10.3.2 Using the self-cleaning liners

Instructions for the user

10.3.2 Using the self-cleaning liners

Periodically, to prevent food residues and unpleasant smells from accumulating inside the oven, the appliance should be operated empty at temperatures of not less than 200°C for a time varying from 30 to 60 minutes, in order to allow the self-cleaning liners to oxidise the residues present; when the oven has cooled, these will then be removed with a damp sponge

10.3.3Looking after the self-cleaning liners

The liners should not be cleaned with abrasive creams or ordinary detergents. Use a damp sponge only, so as not to damage the special characteristics of the enamel which coats the liners.

10.3.4Assembling the self-cleaning liners

1.Remove all accessories from the oven;

2.Remove the side grilles (fig.1);

3.Extract the side liners “F” and “G”(fig. 2);

4.Remove the back panel “A” after undoing the threaded ring-nutC” (fig. 2).

5.Reassemble the panels, restoring them to their original position.

1)10.3.3Looking after the self-cleaning liners 2)

10.4 Door glass

These should always be kept very clean. Use absorbent kitchen paper or, in case of hard to remove dirt, wash with a wet sponge and ordinary detergent.

54

Page 24
Image 24
Smeg CS71-5 manual Door glass, Using the self-cleaningliners, 10.3.3Looking after the self-cleaningliners