Smeg CV 270 AP Indicator lights, Setting the operating temperature, Amber Indicator

Models: CV 270 AP CV 270 A

1 14
Download 14 pages 46.17 Kb
Page 9
Image 9
Setting the operating temperature

en

en

 

 

Setting the operating temperature

(Fig. 2)

The operating temperature is regulated by the temperature control.

Warm

 

 

Cold

1

2

3

4

(Or) Min.

 

 

Max.

1 = Lowest cooling setting (Warmest setting)

4 = Highest cooling setting (Coldest setting)

(Or)

Min. = Lowest cooling setting (Warmest setting)

Max. = Highest cooling setting (Coldest setting)

Please choose the setting according to the desired temperature.

The interior temperature also depends on ambient temperature, the frequency with which the door is opened and the amount of foods kept inside.

Frequently opening the door causes the interior temperature to rise.

For this reason, it is recommended to close the door again as soon as possible after use.

The normal storage temperature of your appliance should be -18 °C (0 °F). If the thermostat knob is turned counter clockwise from position 1, the appliance will be switched off and “click” sound will be heard. Lower temperatures can be obtained by adjusting the thermostat knob towards Position 4.

We recommend checking the temperature with a thermometer to ensure that the storage compartments are kept to the desired temperature. Remember to take the reading immediately since the thermometer temperature will rise very rapidly after you remove it from the freezer.

Indicator lights

There are three coloured indicator lights located inside the appliance which show the operating mode of the freezer (Fig. 2).

Amber Indicator (1)

Illuminates when the fast-freeze switch (4) is turned on and stays on until the fast freeze operation is deactivated manually.

Fast-freeze operation is for freezing fresh food (see Freezing Fresh Food section).

Green Indicator (2)

Illuminates when the appliance is connected to the mains and will glow as long as there is electricity present. The green indicator does not give any indication of the temperature inside the freezer.

Red Indicator (3)

Illuminates

a. When the appliance is first switched on, and will stay on until the pre-set temperature has been attained.

b. If the appliance is overloaded with fresh food.

c. If the appliance door is left open accidentally.

Thermostat knob (5)

The thermostat knob is located on the indicator light frame.

Important:

When you press the fast-freeze switch or adjust the set temperature, there may be a short delay before the compressor starts to operate. This is normal and not a compressor fault.

4

Page 9
Image 9
Smeg CV 270 AP Indicator lights, Setting the operating temperature, Amber Indicator, Green Indicator, Red Indicator