Manuals / Smeg / Kitchen Appliance / Dishwasher

Smeg EN instruction manual User instructions, Technical Data, Width

Models: EN

1 39

Download 39 pages 18.08 Kb

Page 39

Image 39

User instructions

TECHNICAL DATA

Width

Depth measured flush with the outer edge of the control panel

Height

Capacity

Water supply pressure

Electrical characteristics

600mm

from 850 mm to 870 mm

14 Standard place settings

min. 0,05 - max. 0,9 MPa (min. 0.5 – max. 9 bar)

See rating plate

Page 39

Image 39

Smeg EN User instructions, Technical Data, Width, Height Capacity Water supply pressure Electrical characteristics

Contents

GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS Contents NEVER BE REMOVED Safety instructions1. Safety and operating instructions USES OTHER THAN THOSE DESCRIBED ABOVETHIS DISHWASHER MUST BE USED BY ADULTS Safety instructionsSafety instructions AQUASTOP MODELSAPPLIANCE Installation instructions 2. Installation and hook-up2.1 Water supply connection CONNECTING TO THE WATER SUPPLY DRAIN CONNECTIONInstallation instructions NEVER DISCONNECT THE PLUG BY PULLING ON THE POWER SUPPLY LEAD 2.2 Electrical connection and precautionsIF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD Installation instructionsFuse replacement FOR GREAT BRITAIN ONLYInstallation instructions 3.1 Upper panel SELECTED PROGRAM INDICATOR LIGHTSUser instructions 3. Description of the controlsHALF LOAD BUTTON PROGRAM DELAY BUTTON“3/1” OPTION BUTTON “3/1” OPTION LIGHTUser instructions SETTING THE WASHING PROGRAM AND SWITCHING ON1,70 User instructionsEXTRA PROGRAMS 3.2 Washing programsBefore starting a washing program make sure that The correct amount of detergent has been added to the dispenserUser instructions DELAYED START available in all programs except the soak programSELECTING HALF LOAD WASH available in all programs except the soak programTO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENT CANCELLING THE CURRENT PROGRAMCHANGING THE PROGRAM TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENTEND OF CYCLE REMOVING THE DISHESUser instructions 4.1 Using the water softening system 4. Operating instructionsUser instructions User instructions ADJUSTING THE WATER SOFTENING SYSTEM4.2 Using the rinse aid and detergent dispensers WATER HARDNESS TABLEUser instructions ADJUSTING THE RINSE AID DISPENSER SETTING ADDING THE RINSE AIDUser instructions ADDING THE DETERGENT User instructionsDuring the washing cycle, the dispenser will be opened automatically User instructions User instructions 4.3 General warnings and recommendationsCorrect loading of the dishes helps ensure optimal washing results MAKE SURE that the items being washed are dishwasher-safeItems which are not dishwasher-safe Dishes and objects in copper, tin, zinc or brass these tend to stainUser instructions 4.4 Using the baskets LOWER BASKETUser instructions LOADING THE LOWER BASKET User instructionsLoading examples ½ LOAD User instructions CUTLERY BASKETUPPER BASKET LOADING THE UPPER BASKETUser instructions User instructions Depending on the models, the basket may be equipped with some or all of the following accessoriesADJUSTING THE UPPER BASKET Version BUser instructions User instructions 5.1 General warnings and recommendations 5. Cleaning and maintenanceCLEANING THE WATER INTAKE FILTER CLEANING THE SPRAY ARMSFill the rinse aid dispenser Shut off the water supply tap CLEANING THE FILTER UNITGENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE PROLONGED DISUSEReconnect the water intake hose and open the tap again TROUBLESHOOTING MINOR PROBLEMSIf the dishes are not being cleaned properly, check that BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSEUser instructions If the dishes fail to dry or remain dull, check thatIf the dishes show signs of streaking, staining, etc., check that If there are visible traces of rust inside the tankSafety level 6. TroubleshootingE1 E2 E3 E4 E5 E6 FAULTDESCRIPTION E7 E8 E9FAULT User instructionsWidth TECHNICAL DATAHeight Capacity Water supply pressure Electrical characteristics User instructions