Smeg FA550XBI manual Levelling Your Refrigerator, Aligning the doors

Models: FA550X FA550XBI

1 37
Download 37 pages 52.09 Kb
Page 33
Image 33
LEVELLING YOUR REFRIGERATOR

LEVELLING YOUR REFRIGERATOR

The refrigerator has two front and two rear wheels at the base of the product on each side that can be adjusted. If the appliance seems unsteady or you want the doors to close easier, adjust the appliance’s tilt following the instructions below.

1.Check the installation location to be sure you have at least 1 cm clearance on all sides including the top.

2.Connect the appliance to the mains power supply.

3.Move the refrigerator into its final position.

4.Open both doors and remove the plinth to locate the levelling bolts at the left and right of the refrigerator base. The top bolt (1) will adjust the rear wheel, and the bottom bolt (2) will adjust the front wheel.

5.Use the wrench provided to adjust the levelling bolts. Turn the levelling bolt clockwise to raise the appliance, or anti- clockwise to lower it.

It may take several turns of the levelling bolts to adjust the tilt of the refrigerator.

Note: do not unscrew the levelling bolts too much when lowering the appliance as they could fall out.

Aligning the doors

If, after switching on the appliance and adjusting the refrigerator and freezer doors, the doors are misaligned, disconnect the appliance from the power supply and adjust both doors as indicated in the enclosed diagram.

25

Page 33
Image 33
Smeg FA550XBI manual Levelling Your Refrigerator, Aligning the doors