Smeg FA550XBI manual Electrical Connection

Models: FA550X FA550XBI

1 37
Download 37 pages 52.09 Kb
Page 32
Image 32
ELECTRICAL CONNECTION

ELECTRICAL CONNECTION

Regulations require that the appliance is earthed. The manufacturer declines all liability for injury to persons or animals and for damage to property resulting from failure to observe the prescriptions.

Make sure that the installation and the electrical connection are carried out by a qualified technician according to the manufacturer’s instructions and local safety regulations.

If your new appliance is provided with a plug with no earth wire, connect the green/yellow earth wire (A) to the earth screw located on the appliance (B) (see figure).

Ensure that the voltage indicated on the appliance data plate corresponds to the mains voltage.

The plug of the appliance must be easily accessible even after installation so that the appliance can be unplugged if necessary. If this is not possible, connect the appliance to the mains supply by means of a two-pole switch with minimum break distance between contacts of 3 mm, fitted at an easily accessible point.

If the power supply cable plug and socket are not of the same type, replace the socket.

Do not use extension leads or adapters.

After installation, make sure that the appliance is not standing on the power supply cable.

Disconnect the appliance from the power supply by unplugging it. Do not pull the power supply cable.

24

Page 32
Image 32
Smeg FA550XBI manual Electrical Connection