Smeg FAB28JO, FAB28JP manual Instructions for the user, Problem, Possible Cause, Probable Solution

Instructions for the user

PROBLEM	POSSIBLE CAUSE		PROBABLE SOLUTION
Condensation forming on the gasket -	The gasket is not providing an	-	Adjust the hinge if necessary:
of the freezer compartment door	airtight seal on the freezer		undo the two screws and raise or
(FAB28) or on the wall of the freezer	compartment.		lower the hinge slightly as
compartment next to the door			required. Then tighten the screws
			to fix it in place. If the
			condensation is on the top, raise
			the hinge; if it is on the bottom,
			lower it.
		-	open the door less often and for
			shorter times, especially in warm,
			humid weather conditions;

AFTER-SALES SERVICE – READING THE NAMEPLATE.

IF THE PROBLEMS WITH THE PRODUCT YOU HAVE PURCHASED ARE NOT AMONGST THOSE DESCRIBED ABOVE AND IF YOU NEED MORE INFORMATION, PLEASE CONTACT THE AUTHORISED AFTER-SALES SERVICE. YOU WILL FIND THE ADDRESS AND TELEPHONE IN YOUR LOCAL TELEPHONE DIRECTOR UNDER SMEG.

TO SPEED UP THE SERVICE, PLEASE BE READY TO INFORM OUR CALL SERVICE OPERATORS OF THE MODEL OF THE PRODUCT YOU HAVE PURCHASED AND THE SERIAL NUMBER MARKED ON THE NAMEPLATE INSIDE THE BODY OF THE REFRIGERATOR. THANK YOU IN ADVANCE FOR YOUR ASSISTANCE.

19