INSTALLATION
Removal of transport bracket
The washing machine is fitted with a transport bracket to avoid any possible damage during transport.
Before using the washing machine, the transport bracket at the back MUST be removed.
1.Unscrew the two screws A and the four screws B with a flat screwdriver or a No. 8 hex nut box spanner.
2.Remove the transport bracket.
3.Replace the four outer screws B on the machine and tighten them.
4.Remove the two seals C from the hose holder and clip them into the openings of the machine D.
Note: do not forget to replace and tighten the four outer screws.
AB
D 
1
1
1
2
C
4
D
4
GB 14
