Manuals / Smeg / Laundry Appliance / Washer

Smeg GB ST L80 manual Before Using The Washing Machine First Wash Cycle, Contents

Models: GB ST L80

1 19

Download 19 pages 18.59 Kb

Page 3

Image 3

BEFORE USING THE WASHING MACHINE FIRST WASH CYCLE

PRECAUTIONS AND GENERAL

RECOMMENDATIONS

DESCRIPTION OF THE WASHING MACHINE PREPARATION OF THE WASHING DETERGENTS AND ADDITIVES PROGRAMME SELECTION

CLEANING THE FOREIGN BODY TRAP DRAINING RESIDUAL WATER

CARE AND MAINTENANCE

TROUBLESHOOTING GUIDE

AFTER-SALES SERVICE

TRANSPORT AND HANDLING

INSTALLATION

ELECTRICAL CONNECTION

Page 3

Image 3

Contents

5019 612 PROGRAMME CHARTA. Temperature Selection Knob B. “On/Off” Button GB STL“Intensive Rinse” button CANCEL PROGRAMME4. Turn the temperature selector knob to the desired temperature CONSUMPTION DATACARE AND MAINTENANCE TROUBLESHOOTING GUIDE AFTER-SALES SERVICE BEFORE USING THE WASHING MACHINE FIRST WASH CYCLEPRECAUTIONS AND GENERAL RECOMMENDATIONS CLEANING THE FOREIGN BODY TRAP DRAINING RESIDUAL WATER1.Remove the packaging and check BEFORE USING THE WASHING MACHINE3.Install the washing machine Dimensions2.Energy saving tips 4.Child safetyFIRST WASH CYCLE 1.PackingStain removal DESCRIPTION OF THE WASHING MACHINEPREPARATION OF THE WASHING Sort the laundryLoading the laundry 2a 2b 2cFilling up with detergents and additives WATER HARDNESS CHARTDETERGENTS AND ADDITIVES DosageProgramme start Cancel programmePROGRAMME SELECTION Preparation of wash cycleCLEANING THE FOREIGN BODY TRAP Detergent dispenser CARE AND MAINTENANCENote ensure that the detergent dispenser is correctly reinstalled DRAINING RESIDUAL WATER6. Turn on the tap and check that the connections are water- tight Recovering an object that falls between the drum and the tubCheck and clean regularly at least two or three times a year Water inlet hose filterThe washing machine does not start, but the pilot lamp is on TROUBLESHOOTING GUIDEWater inlet hoses The washing machine does not start, no lamp lights upExcessive foam formation may also prevent spinning Water stop fault depending on modelThe “Water Stop” fault may have been triggered by Final spin results are poorSpecify AFTER-SALES SERVICEBefore contacting After-Sales Service TRANSPORT AND HANDLINGNote do not forget to replace and tighten the four outer screws INSTALLATIONA B D Removal of transport bracketConnect the water inlet hose Adjust the feetConnect the water drain hose Water stop anti-flooding system1 Warning - this appliance must be earthed Fuse replacementELECTRICAL CONNECTION Valid Only For Great Britain And Ireland

CONTENTS

BEFORE USING THE WASHING MACHINE FIRST WASH CYCLE

PRECAUTIONS AND GENERAL

CLEANING THE FOREIGN BODY TRAP DRAINING RESIDUAL WATER

CARE AND MAINTENANCE

TRANSPORT AND HANDLING