Gas Connection, Instructions for the installer

Image 7

Contents

Contents NEVER UNPLUG BY PULLING ON THE CABLE Introduction1. INSTRUCTIONS FOR SAFE AND PROPER USE THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USE THE PLATE ON THE CASING MUST NOT BE REMOVED 2. POSITIONING OF HOB Instructions for the installer2.1.1 Attachment to support structure Instructions for the installer 3. ELECTRICAL CONNECTION 4. GAS CONNECTION 4.2 Ventilation of rooms 4.1 Connection to LPG4.3 Discharge of combustion products 5.1 Removing the hob 5. ADAPTATION TO DIFFERENT TYPES OF GAS Rated BurnerheatingLPG - G30/G31 28/37 mbar capacity kW 5.2 Regulation for LPG 5.4 Regulation for town gas 5.3 Regulation for natural gasheating Referred to distance “X” in mm 5.5 Regulation of primary air 6.1 Regulation of minimum for natural gas 6. FINAL OPERATIONS6.2 Regulation of minimum for LPG BURNERS 6.3 Arrangement of burners on hob6.4 Lubrication of gas taps This must be done by a qualified technician Instructions for the user 7. USING THE HOB 7.4 Using a griddle plate 7.2 Practical advice for using the burners7.3 Diameter of containers 7.5 Electric elements 7.5.2 Using the electric elements7.5.1 Turning on electric elements To use correctly remember to 8.1.1 Regular daily cleaning of the hob 8. CLEANING AND MAINTENANCENever use a steam jet to clean the appliance Before any intervention, disconnect the power supply of the device 8.2.3 The cover 8.2.1 Ignition plugs and safety devicesCAUTION do not wash these components in a dishwasher 8.2.2 The electric element

Smeg GCO90XG manual Gas Connection, Instructions for the installer

Models: GCO90XG