6 Solution suggestions for problems

 

 

 

 

Problem

Cause

Explanation / Suggestion

 

 

Machine may have

 

 

Program cannot

switched to self

Reset your machine by pressing “Start/Pause/

 

protection mode due to

 

be started or

an infrastructure problem

Cancel” button for 3 seconds. (see, Canceling

 

selected.

a Program)

 

(such as line voltage, water

 

 

 

 

 

pressure, etc.).

 

 

There is water

 

Be sure the seals of the water inlet hoses are

 

There might be problems

securely fitted.

 

coming from

 

with hoses or the pump

Tightly attach the drain hose to the tap.

 

the bottom of

 

filter.

Make sure that the pump filter is completely

 

the machine.

 

 

closed.

 

 

 

 

Machine

 

 

 

stopped

Machine can stop

It will resume operating when the voltage is

 

shortly after

temporarily due to low

 

back to the normal level.

 

the program

voltage.

 

 

 

started.

 

 

 

 

 

The automatic spin correction system might

 

It continuously

 

have been activated due to the unbalanced

 

 

distribution of the laundry in the drum.

 

spins.

 

 

 

The laundry in the drum may be clustered

 

Remaining time

 

 

There may be an imbalance

(bundled laundry in a bag). Laundry should be

 

does not count

of laundry in the machine.

rearranged and re-spun.

 

down.

 

 

No spinning is performed when the laundry is

 

(For models

 

 

 

not evenly distributed in the drum to prevent

 

with a display)

 

 

 

any damage to the machine and to its

 

 

 

 

 

 

environment.

 

 

In the case of a paused

 

 

 

countdown while taking in

The machine will wait until there is a sufficient

 

 

water:

 

 

amount of water to avoid poor washing results

 

 

Timer will not countdown

 

 

due to lack of water. Then the timer will start to

 

 

until the machine is filled

 

 

count down.

 

 

with the correct amount of

 

 

 

 

 

water.

 

 

 

In the case of a paused

 

 

It continuously

countdown at the heating

 

 

step:

 

 

washes.

 

 

Time will not count

 

 

Remaining time

 

 

down until the selected

 

 

does not count

temperature for the

 

 

down.

 

 

program is reached

 

 

(For models

 

 

 

The automatic spin correction system might

 

with a display)

 

 

 

 

have been activated due to the unbalanced

 

 

In the case of a paused

distribution of the laundry in the drum.

 

 

The laundry in the drum may be clustered

 

 

countdown at the spinning

 

 

(bundled laundry in a bag). Laundry should be

 

 

step:

 

 

rearranged and re-spun.

 

 

There may be an imbalance

 

 

No spinning is performed when the laundry is

 

 

of laundry in the machine.

not evenly distributed in the drum to prevent

 

 

 

any damage to the machine and to its

 

 

 

environment.

 

11- EN

Page 11
Image 11
Smeg LBS107-9, LBS-27-9 manual Solution suggestions for problems, Problem Cause Explanation / Suggestion