Smeg LBS86F manual Solution suggestions for problems, Water

Models: LBS86F

1 13
Download 13 pages 33.95 Kb
Page 11
Image 11

6 Solution suggestions for problems

 

 

 

Cause

Explanation / Suggestion

 

Program cannot be started or selected.

 

 

 

 

 

• Machine may have switched to self

• Reset your machine by pressing “Start/Pause/

protection mode due to an infrastructure

Cancel” button for 3 seconds. (see, Canceling a

problem (such as line voltage, water

Program)

pressure, etc.).

 

 

There is water coming from the bottom of the machine.

 

• Be sure the seals of the water inlet hoses are

• There might be problems with hoses or the

securely fitted.

• Tightly attach the drain hose to the tap.

pump filter.

• Make sure that the pump filter is completely

 

 

closed.

 

 

Machine stopped shortly after the program started.

• Machine can stop temporarily due to low

• It will resume operating when the voltage is

voltage.

back to the normal level.

It continuously spins. Remaining time does not count down. (For models with a display)

 

The automatic spin correction system might

 

 

have been activated due to the unbalanced

 

 

distribution of the laundry in the drum.

 

The laundry in the drum may be clustered

• There may be an imbalance of laundry in the

 

(bundled laundry in a bag). Laundry should be

machine.

 

rearranged and re-spun.

 

No spinning is performed when the laundry is

 

 

not evenly distributed in the drum to prevent

 

 

any damage to the machine and to its

 

 

environment.

It continuously washes. Remaining time does not

count down. (For models with a display)

 

 

 

In the case of a paused countdown while taking in

The machine will wait until there is a sufficient amount

water:

 

of water to avoid poor washing results due to lack of

• Timer will not countdown until the machine is filled

 

 

water. Then the timer will start to count down.

with the correct amount of water.

 

 

 

 

 

 

• In the case of a paused countdown at the

 

 

heating step:

 

 

• Time will not count down until the selected

 

 

temperature for the program is reached

 

 

 

 

 

 

The automatic spin correction system might have

 

 

been activated due to the unbalanced distribution of

• In the case of a paused countdown at the

 

the laundry in the drum.

The laundry in the drum may be clustered (bundled

spinning step:

 

laundry in a bag). Laundry should be rearranged and

• There may be an imbalance of laundry in the

 

 

re-spun.

machine.

 

No spinning is performed when the laundry is not

 

 

 

evenly distributed in the drum to prevent any damage

 

 

to the machine and to its environment.

 

 

 

There is foaming over the detergent drawer

 

 

Too much detergent was used.

Mix 1 tablespoonful softener and ½ liter water and pour into the main wash compartment of the detergent drawer.

11 - EN

Page 11
Image 11
Smeg LBS86F manual Solution suggestions for problems, Water