Smeg LS6147XH7 instruction manual User instructions

User instructions

To set the delay once the program has started, proceed as follows.

If the program you wish to carry out is the same as the one already in progress:

ξpress the START/PAUSE button (2) for a few seconds, until the program lights 4 and 5 (marked "end") come on;

ξannul the program in progress (see relative section) and wait for the cycle to come to an end;

ξselect the program again;

ξselect the delay required;

ξpress the START/PAUSE button (2) to start the new program.

If the program you wish to carry out is different from the one already in progress:

ξpress the START/PAUSE button (2) for a few seconds, until the program lights 4 and 5 (marked "end") come on;

ξchange the program;

ξselect the delay required;

ξpress the START/PAUSE button (2) to start the new program. The dishwahser will pump out the water and restart with the delay set and the new program.

6 8 9 10 11 4

1 5 7 3 2

22