Troubleshooting, User instructions, Fault | Smeg LSA14X7 specification

E1

E2

E3

E4

E5

E6

36

User instructions

6. Troubleshooting

The dishwasher is capable of signalling a number of faults through the simultaneous illumination of several indicator lights, with the following meanings:

FAULT	DESCRIPTION

	Acquastop failure
	The anti-flooding system has been activated (for the
	relevant models only). The system is tripped in case
	of water leaks. Contact the after-sales service.

	Safety level
	The system which limits the water level inside the
	dishwasher has been tripped. Interrupt the program
	and switch off the dishwasher. Switch the dishwasher
	back on, program it again and start the washing
	cycle. If the problem persists, contact the after-sales
	service.

	Water heating malfunction
	The water is not heated or the heating parameters
	are not correct. Repeat the washing program; if the
	problem persists, contact the after-sales service.

	Water temperature monitoring malfunction
	Interrupt the program and switch off the dishwasher.
	Switch the dishwasher back on, program it again and
	start the washing cycle. If the problem persists,
	contact the after-sales service.

	Water intake malfunction
	The appliance does not take in water or does not do
	so correctly. Check that the water connections are
	correct, the water intake tap is turned on and the filter
	is not fouled. If the problem persists, contact the
	after-sales service.

	Water pump-out malfunction
	The appliance does not pump out the water or does
	not do so correctly. Check that the drain hose is not
	kinked or crushed and that the siphon and filter are
	not fouled. If the problem persists, contact the after-
	sales service.

Image 37

Smeg LSA14X7 Troubleshooting, User instructions, E1 E2 E3 E4 E5 E6, Fault, Description, Acquastop failure, Safety level

Contents

GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS Contents 1. Safety and operating instructions Safety instructionsUSES OTHER THAN THOSE DESCRIBED ABOVE NEVER BE REMOVED THIS DISHWASHER MUST BE USED BY ADULTS APPLIANCE AQUASTOP MODELS 2. Installation and hook-up Installation instructions2.1 Water supply connection DRAIN CONNECTION CONNECTING TO THE WATER SUPPLY NEVER DISCONNECT THE PLUG BY PULLING ON THE POWER SUPPLY LEAD 2.2 Electrical connection and precautionsIF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD FOR GREAT BRITAIN ONLY Fuse replacement 3. Description of the controls User instructionsSELECTED PROGRAM INDICATOR LIGHTS 3.1 Upper panel “3/1” OPTION BUTTON 13 INFORMATION DISPLAY SETTING THE WASHING PROGRAM AND SWITCHING ON“3/1” OPTION LIGHT HALF LOAD BUTTON Reference program as per EN 50242 standard See energy label 0,85 0,03100’ 1,20 Before starting a washing program make sure that 3.2 Washing programsThe correct amount of detergent has been added to the dispenser EXTRA PROGRAMS available in all programs except the soak program SELECTING HALF LOAD WASHDELAYED START available in all programs except the soak program CHANGING THE PROGRAM CANCELLING THE CURRENT PROGRAMTO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENT REMOVING THE DISHES END OF CYCLE 4.1 Using the water softening system 4. Operating instructions ADJUSTING THE WATER SOFTENING SYSTEM WATER HARDNESS TABLE 4.2 Using the rinse aid and detergent dispensers ADDING THE RINSE AID ADJUSTING THE RINSE AID DISPENSER SETTING During the washing cycle, the dispenser will be opened automatically ADDING THE DETERGENT User instructions Correct loading of the dishes helps ensure optimal washing results 4.3 General warnings and recommendationsMAKE SURE that the items being washed are dishwasher-safe Dishes and objects in copper, tin, zinc or brass these tend to stain Items which are not dishwasher-safe LOWER BASKET 4.4 Using the baskets Loading examples ½ LOAD LOADING THE LOWER BASKET CUTLERY BASKET LOADING THE UPPER BASKET UPPER BASKET Depending on the models, the basket may be equipped with some or all of the following accessories Version B ADJUSTING THE UPPER BASKET User instructions CLEANING THE WATER INTAKE FILTER 5. Cleaning and maintenanceCLEANING THE SPRAY ARMS 5.1 General warnings and recommendations GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE CLEANING THE FILTER UNITPROLONGED DISUSE Fill the rinse aid dispenser Shut off the water supply tap If the dishes are not being cleaned properly, check that TROUBLESHOOTING MINOR PROBLEMSBEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE Reconnect the water intake hose and open the tap again If the dishes show signs of streaking, staining, etc., check that If the dishes fail to dry or remain dull, check thatIf there are visible traces of rust inside the tank FAULT 6. TroubleshootingSafety level E1 E2 E3 E4 E5 E6 Turbine flow-regulator malfunction E7 E8 E9Alternate washing system malfunction Water intake system malfunction Electrical characteristics TECHNICAL DATAWidth Height depending on models Capacity Water supply pressure