Manuals / Smeg / Kitchen Appliance / Dishwasher

Smeg LSA14X7 User instructions, Technical Data, Width, Electrical characteristics

Models: LSA14X7

1 40

Download 40 pages 27.69 Kb

Page 39

Image 39

User instructions

TECHNICAL DATA

Width

Depth measured flush with the outer edge of the control panel

Height (depending on models)

Capacity

Water supply pressure

Electrical characteristics

597 ⎟ 599 mm

550 mm

from 820 mm to 870 mm from 860 mm to 910 mm

14 Standard place settings

min. 0,05 - max. 0,9 MPa (min. 0.5 – max. 9 bar)

See rating plate

Page 39

Image 39

Smeg LSA14X7 User instructions, Technical Data, Width, Height depending on models Capacity Water supply pressure

Contents

GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS Contents NEVER BE REMOVED Safety instructions1. Safety and operating instructions USES OTHER THAN THOSE DESCRIBED ABOVETHIS DISHWASHER MUST BE USED BY ADULTS Safety instructionsSafety instructions AQUASTOP MODELSAPPLIANCE Installation instructions 2. Installation and hook-up2.1 Water supply connection Installation instructions CONNECTING TO THE WATER SUPPLYDRAIN CONNECTION IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD Installation instructions2.2 Electrical connection and precautions NEVER DISCONNECT THE PLUG BY PULLING ON THE POWER SUPPLY LEADInstallation instructions Fuse replacementFOR GREAT BRITAIN ONLY 3.1 Upper panel User instructions3. Description of the controls SELECTED PROGRAM INDICATOR LIGHTS“3/1” OPTION LIGHT 13 INFORMATION DISPLAY SETTING THE WASHING PROGRAM AND SWITCHING ONUser instructions “3/1” OPTION BUTTONReference program as per EN 50242 standard See energy label User instructions100’ User instructions0,03 0,85The correct amount of detergent has been added to the dispenser User instructions3.2 Washing programs Before starting a washing program make sure thatDELAYED START available in all programs except the soak program User instructionsSELECTING HALF LOAD WASH available in all programs except the soak programTO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT CANCELLING THE CURRENT PROGRAMUser instructions CHANGING THE PROGRAMUser instructions END OF CYCLEREMOVING THE DISHES 4. Operating instructions 4.1 Using the water softening systemUser instructions User instructions ADJUSTING THE WATER SOFTENING SYSTEM4.2 Using the rinse aid and detergent dispensers User instructionsWATER HARDNESS TABLE ADJUSTING THE RINSE AID DISPENSER SETTING User instructionsADDING THE RINSE AID User instructions ADDING THE DETERGENTDuring the washing cycle, the dispenser will be opened automatically User instructions MAKE SURE that the items being washed are dishwasher-safe User instructions4.3 General warnings and recommendations Correct loading of the dishes helps ensure optimal washing resultsUser instructions Items which are not dishwasher-safeDishes and objects in copper, tin, zinc or brass these tend to stain 4.4 Using the baskets User instructionsLOWER BASKET User instructions LOADING THE LOWER BASKETLoading examples ½ LOAD CUTLERY BASKET User instructionsUser instructions UPPER BASKETLOADING THE UPPER BASKET User instructions Depending on the models, the basket may be equipped with some or all of the following accessoriesADJUSTING THE UPPER BASKET User instructionsVersion B User instructions User instructions 5. Cleaning and maintenanceCLEANING THE WATER INTAKE FILTER CLEANING THE SPRAY ARMSPROLONGED DISUSE CLEANING THE FILTER UNITGENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE User instructionsBEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE TROUBLESHOOTING MINOR PROBLEMSIf the dishes are not being cleaned properly, check that User instructionsIf there are visible traces of rust inside the tank User instructionsIf the dishes fail to dry or remain dull, check that If the dishes show signs of streaking, staining, etc., check thatUser instructions 6. TroubleshootingFAULT Safety levelDESCRIPTION FAULTUser instructions E7 E8 E9Width TECHNICAL DATAElectrical characteristics User instructions