Extent of the delivery:
-Party Cooler as shown on the drawing
-Users manual
Equipment:
1.Transparent
2.Detachable bottom
3.Two side tables of hardwood
4.Refrigerating compartment
5.Bottle holder
6.Variable temperature control
7.Ball bearing castors
Mount the two side tables and the bottle holder on the handle as shown on the drawing.
Side Table Installation
Temperature
control
NB!
Avoid overloading the side tables, or else the Party Cooler may loose its balance (max. 5 kg per side table)!
2
6. Cleaning
Wiping off the condensed water and occasional cleaning is the only maintenance needed.
NB!
In no circumstances use soap or cleaning agents containing soda and abrasive substances for the cleaning.
1.Pull the plug out of the wall socket.
2.Remove the side tables and the bottle holder.
3.Remove the lid.
4.Remove the contents of the appliance.
5.Remove the detachable bottom.
6.Wipe the inside and outside surfaces with a damp cloth. The addition of vinegar (cleaning vinegar, cooking vinegar or vinegar essence) to the water is good for the prevention of mould fungus.
7.Take the lid apart as shown on the drawing and
clean it.
8.Clean the detachable bottom and the lid parts with lukewarm water and detergent.
9.Wipe all parts thoroughly after the cleaning.
10.Turn the slits in the sealing ring and in the hinge rubber strip downwards when assembling the lid.
IMPORTANT :
When the Party Cooler is not in use, it must be completely dry inside to avoid mould growth (if possible, leave the lid open).
7
