POWER SWITCH-ON
TYPE "A"TYPE "B"
TYPE "A" Turn the ON/OFF switch (2) to the letter I.
TYPE "B" Press the ON/OFF key (3).
The ON light (4) illuminates.
STARTING THE DISHWASHER
After correctly carrying out all the preceding operations, to start the dishwasher simply press the START/STOP (5) button for a few seconds, until the start cycle acoustic device sounds. The INFORMATION DISPLAY (8) will show the duration of the program in minutes. The duration time is only approximate, because it depends on the washing conditions (quantity of dishes, water temperature, etc.), and is also continually updated as the washing program progresses.
If it is necessary to open dishwasher door during the washing cycle, there will be a
END OF CYCLE
The end of the washing cycle is signalled by a brief sounding of an acoustic device and by the blinking of the selected program on the INFORMATION DISPLAY (8). Before setting a new washing program, the door must first be opened, then reclosed, or the START/STOP (5) button pressed to “reset” the display and stop the flashing.
TABLE FOR CERTIFICATION BODIES |
|
|
|
|
|
Reference standard | EN 50242 | |
|
|
|
Reference program |
| (*) Selector on P6 + ECO DRYING |
|
|
|
Load |
| 12 |
|
|
|
Type of detergent |
| B |
|
|
|
Amount of detergent |
| 30 g |
|
|
|
Rinse aid setting |
| Depending on the model 3/4 or 4/6 |
EN 50242 STANDARD LOADS
LOWER BASKET | UPPER BASKET |
Depending on models, the cutlery basket may have removable grilles in which the cutlery can be inserted to keep the items far enough apart and allow optimal water passage.