Smeg S399XPZ6 manual Do not USE a Steam JET for Cleaning the Inside of the Oven

Instructions for the user

To clean the bottom of the oven, proceed as follows with the oven cold.

1) 2)

Remove the pizza plate and then the base to which it is fixed (Fig. 1). Lift the base a few mm and then bring it out of the oven.

Now lift the end of the heating element next to the door of the oven and clean the bottom. When the operation is complete, damp parts should be dried thoroughly.

•DO NOT USE A STEAM JET FOR CLEANING THE INSIDE OF THE OVEN.

•Clean the oven grill and side guides with hot water and non-abrasive detergent. Rinse and dry.

•The oven should be operated at the maximum temperature for about 15/20 minutes after using specific products, to eliminate the residues deposited inside the oven.

•For easier cleaning, the door can be removed (see P. 8.3)

The pizza plate must be washed separately;

•Before cleaning, remove any dirt burnt onto the stone with the aid of a metal spatula or a ceramic hob cleaning scraper;

•For the best results, the stone must be still warm; otherwise, wash it with hot water;

•Use non-abrasive metal mesh pads or scotch-brite, dipped in lemon or vinegar;

•Never use detergents;

•Never wash in the dishwasher;

•Never leave the stone to soak;

•The damp stone must not be used for a least 8 hours after the end of the cleaning procedures;

•Over time, slight cracks may appear on the surface of the stone.

•This is due to the normal expansion of the stone's finishing glazes at high temperatures.

•To refit the pizza plate base, push it snugly against the oven floor and down so that it locks with the pizza heating element (detail A, Fig. 2).

57