Smeg SDCY66X1 User instructions, 0,03, 1,57, 1,44, 1,24, 0,86, Consumption, Program, Sequence

User instructions

After using the table to identify the most appropriate washing program, turn the PROGRAM SELECTION knob (1) to set the program of choice by aligning the pointer with the program number. If the appliance is fitted with the selected program indicator disc, this will show the number of the program set.

				AMOUNT OF	DURATION	CONSUMPTION
		TYPE AND DEGREE		DETERGENT
	SWITCH,		PROGRAM
	PROGRAM	OF DIRT	SEQUENCE
		ON DISHES			MINUTES	WATER	POWER
				GRAMS
					(2)	LITRES (2)	KWh (1)
		Pans and dishes
1	SOAK	pending	Cold prewash	-	6'	5	0,03
		completion of
		the load
			Cold prewash
		Very dirty pans	Wash at 65°C
2	INTENSIVE	and dishes, even	2 cold rinses	30	94'	24	1,57
	65°C	with dried-on dirt	Rinse at 68°C
			Dry
			Cold prewash
	NORMAL	Pans and dishes	Wash at 60°C			20
3			Cold rinse	30	85'		1,44
	60°C (*)	with normal dirt
			Rinse at 68°C
			Dry
			Wash at 60°C
4	ECO	Dishes	Cold rinse	30	82'	17	1,24
	60°C	with light dirt	Rinse at 68°C
			Dry
		Dishes for rinsing	Cold rinse	-
5	RINSE		Rinse at 68°C		48'	11	0,86
		and drying
			Dry

Only run the soak program with half loads.

(*)Reference program as per EN 50242 standard.

(–) Not present.

(1) Average power consumption with the softener set on level 2.

(2)The cycle duration and power consumption may vary according to the water and room temperatures, and the type and amount of dishes.

The washing cycle will not take place if the dishwasher door is left open or not properly closed.