![](/images/new-backgrounds/1080752/8075229x1.webp)
Instructions for the user
7 USING THE HOB
Before turning on the burners, make sure that the burner rings, caps and grids have been fitted correctly.
In the ultrarapid burner, notch A must be aligned with pin B.
Grid C (where available) is intended for use with woks (Chinese pans). Adapter D comes only with open grids models and is intended for use with small sized vessels.
7.1Ignition of the burners
Raised indicators make for easier and clearer reading and use of the controls, each knob being connected to its corresponding burner by a rib. Setting corresponds to the elongated part of the knob or to the marking on it.
(Only where applicable)
The device is fit with electronic ignition. Simply press and simultaneously turn the knob
Concerning models with valves, push the knob for approximately 2 seconds in order to keep the flame burning and to activate the safety device.
The burner might go off when the knob is released. In this case repeat the aforesaid operation keeping the knob
pressed for more than 2 seconds.
Should the burners go off accidentally in the models with valves, a safety device will trip after approximately 20 seconds to block the gas outlet even if the cock is open.
35