Smeg ST0904 instruction manual Changing The Program, Extra Programs, User instructions

User instructions

CHANGING THE PROGRAM

To change the program in progress, simply open the door and select a new program. When the door is closed the dishwasher will automatically select the new program.

SELECTING THE WASH-ZONE OPTION (available in all programs except the soak program)

Press button (10) in repetition to select the zone where you wish to concentrate the washing action, in the following order:

1)right zone 65% - left zone 35% (right-hand light on);

2)right zone 35% - left zone 65% (left-hand light on);

3)both zones 50% (lights off).

EXTRA PROGRAMS

Button (6) gives access to five extra programs in addition to the ones which can be selected directly using the program selector button.

This button must be pressed (the light comes on) after selection of the "main" program (1, 2, 3, 4 or 5).

This function is retained in the memory, so the button has to be pressed again (the light goes out) if the user wishes to execute one of the 5 main programs at the next cycle.

50