Smeg ST0904 instruction manual User instructions, Only run the soak program with half loads

User instructions

After using the table to identify the most appropriate washing program:

•press the ON/OFF button (1) and wait for the PROGRAM INDICATOR LIGHT (2) to illuminate;

•keep pressing the PROGRAM SELECTION button (3) until the indicator light corresponding to the desired program illuminates;

•close the door; after about 2" the program will start. While it is in progress, the relative LIGHT will flash (indicating that the program is being executed).

	PROGRAMME
NR	SYMBOL	NAME
1		SOAK
2		QUICK
3		DAILY
4		NORMAL
		65°C
5		QUICK &
		INTENSE

TYPE OF	PROGRAM
DISHES
	DESCRIPTION
AND DIRT
Mixed dishes	Cold	rinse	(to
	prevent	dirt	from
awaiting washing
	drying)
Dishes and	Wash at 38°C
	Cold rinse
glasses with
	Rinse at 58°C
light dirt
	Wash at 65°C
Mixed dishes,	Cold rinse
normal dirt	Rinse at 68°C
	Dry
Mixed dishes	Cold prewash
	Wash at 65°C
and pans,	Cold rinse
normal dirt	Rinse at 68°C
	Dry

Mixed dishes,	Wash at 65°C
normal dirt
	Cold rinse
which has
	Rinse at 70°C
not dried

	DURATION	CONSUMPTION (3)
	MINUTES	WATER	POWER	DETERGENT
				GRAMS
(2)		(LITRES)	(KWh)

(1)(2)

15'	3,5	0,01	-
45'	10	0,80	20
90'	10	1	30
105'	14	1,30	30
50'	10	1,20	30

Only run the soak program with half loads.

The WASH-ZONE (10) and 3/1 (8) options are available for all programs except soaking.

(–) Not present.

(1)Average power consumption with the softener set on level 2.

(2)The cycle duration and power consumption may vary according to the water and room temperatures, and the type and amount of dishes.

(3)The stated water and power consumption values refer to nominal conditions. Real values are affected by the type of load of dishes, room temperature and incoming water temperature.

47