Using the baskets | Smeg ST1124 specs

User instructions

3.4 Using the baskets

The dishwasher has a capacity of 12 place-settings, including serving dishes.

EN 50242 STANDARD LOADS FOR CERTIFICATION BODIES

LOWER BASKET

UPPER BASKET

UPPER BASKET

for AAA models only (see energy label)

The upper basket must be set in the low position.

Image 28

Smeg ST1124 instruction manual Using the baskets, EN 50242 Standard Loads for Certification Bodies

Contents

Guide for Using the Dishwasher and the Washing Programs Contents Description of the controls Upper panel Setting the Washing Program and Switching on Extra Program Light Programme Number & Symbol Minutes Water Cancelling the Current Program Washing programsTable for Certification Bodies Reference standard Selecting Half Load Wash on some models only Extra Programs Delaying the Program Option Button Electronic Setting models with display Adjusting the Water Softening SystemWater Hardness Table Switch Setting models without display END of Cycle Removing the Dishes Troubleshooting Fault Description Water intake system malfunction Contents Safety instructions Safety and operating instructions Safety instructions Aquastop Models Installation and hook-up Water supply connection Electrical connection Connecting to the Water SupplyDrain Connection Using the water softening system Operating instructions Using the rinse aid and detergent dispensers Adjusting the Rinse AID Dispenser Setting Adding the Rinse AID Adding the Detergent Products General warnings and recommendations User instructions Using the baskets EN 50242 Standard Loads for Certification Bodies Lower Basket Loading the Lower Basket Cutlery Basket Upper Basket Loading the Upper Basket Pull-out version Adjusting the Upper BasketPush-button version Cleaning and maintenance Cleaning the Water Intake FilterCleaning the Spray Arms Avoid the use of acidic or abrasive detergents Cleaning the Filter Unit Prolonged Disuse Before Starting the Dishwasher After Prolonged Disuse If the dishes fail to dry or remain dull, check that Technical Data 598