Smeg ST1124 instruction manual Setting the Washing Program and Switching on, Extra Program Light

Models: ST1124

1 39
Download 39 pages 32.75 Kb
Page 4
Image 4

User instructions

EXTRA PROGRAM LIGHT

7Illuminates to indicate that one of the five extra programs (see table) is going to be executed.

8

9

3/1 OPTION BUTTON

Press this button to activate the option for use of 3/1 products.

3/1 OPTION LIGHT

Illuminates to indicate that the function is activated.

HALF LOAD BUTTON (on some models only)

10Press this button to activate the half load wash option. HALF LOAD LIGHT (on some models only)

11One of the two buttons illuminates to indicate that the half load wash option in the top or bottom basket has been selected.

PROGRAM DELAY BUTTON (on some models only)

12Press this button to delay the start of the program by up to 9 hours.

13INFORMATION DISPLAY (on some models only)

SETTING THE WASHING PROGRAM AND SWITCHING ON

To select the most suitable program for the dishes to be washed refer to the table below, which indicates the most appropriate program according to dish type and degree of soiling.

After using the table to identify the most appropriate washing program:

press the ON/OFF button (1) and wait for the PROGRAM INDICATOR LIGHT (2) to illuminate;

keep pressing the PROGRAM SELECTION button (3) until the indicator light corresponding to the desired program illuminates;

close the door; after about 2" the program will start. While it is in progress, the relative LIGHT will flash (indicating that the program is being executed).

19

Page 4
Image 4
Smeg ST1124 instruction manual Setting the Washing Program and Switching on, Extra Program Light