User instructions, Description of the controls | Smeg ST115S

User instructions

User instructions

3. Description of the controls

3.1 Upper panel

All the dishwasher controls are grouped on the upper panel. Switch-on, programming, switch-off etc. procedures are only possible when the door is open.

1

ON/OFF BUTTON

Pressing this button energises the appliance.

SELECTED PROGRAM INDICATOR LIGHTS

2Illumination of this light denotes the program selected and the occurrence of a fault (troubleshooting).

PROGRAM SELECTION BUTTON

3By pressing this button in sequence it is possible to select the desired program.

4

5

6

SALT WARNING LIGHT

Illumination of this light signals that salt container is empty.

RINSE AID WARNING LIGHT

Illumination of this light signals that rinse aid dispenser is empty.

HALF LOAD BUTTON

Press this button to activate the half load wash option.

HALF LOAD LIGHT

7Illumination of the light indicates selection of the HALF-LOADfunction.

9

Image 10

Smeg ST115S User instructions, Description of the controls, Upper panel, On/Off Button, Selected Program Indicator Lights

Contents

Page Contents USES OTHER THAN THOSE DESCRIBED ABOVE Safety instructions1. Safety and operating instructions NEVER BE REMOVED THIS DISHWASHER MUST BE USED BY ADULTS AQUASTOP MODELS APPLIANCE 2. Installation and hook-up Installation instructions2.1 Water supply connection CONNECTING TO THE WATER SUPPLY DRAIN CONNECTION 2.2 Electrical connection and precautions L = brown N = blue = yellow-green Fuse replacement FOR GREAT BRITAIN ONLY SELECTED PROGRAM INDICATOR LIGHTS User instructions3. Description of the controls 3.1 Upper panel DELAYED START BUTTON SETTING THE WASHING PROGRAM AND SWITCHING ONDELAYED START LIGHTS User instructions SELECTING HALF LOAD WASH 3.2 Washing programsBefore starting a washing program make sure that available in all programs except the soak program CHANGING THE PROGRAM CANCELLING THE CURRENT PROGRAMTO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT END OF CYCLE REMOVING THE DISHES 4. Operating instructions 4.1Using the water softening system ADJUSTING THE WATER SOFTENING SYSTEM 4.2 Using the rinse aid and detergent dispensers WATER HARDNESS TABLE ADJUSTING THE RINSE AID DISPENSER SETTING ADDING THE RINSE AID ADDING THE DETERGENT The market offers liquid and powder detergents with differing chemical compositions, which may contain phosphates, or be phosphate-freebut contain natural enzymes 4.3 General warnings and recommendations Items which are not dishwasher-safe LOWER BASKET 4.4 Using the basketsLOADING THE LOWER BASKET insert CUTLERY BASKETUPPER BASKET closed LOADING THE UPPER BASKET Loading examples Models with cutlery racks ADJUSTING THE UPPER BASKET Version B User instructions CLEANING THE SPRAY ARMS 5. Cleaning and maintenanceCLEANING THE WATER INTAKE FILTER 5.1General warnings and recommendations •Fill the rinse aid dispenser CLEANING THE FILTER UNITPROLONGED DISUSE Shut off the water supply tap TROUBLESHOOTING MINOR PROBLEMS If the program fails to start, check that there is rinse aid inside the special container Safety level 6. TroubleshootingFAULT E1 E2 E3 E4 E5 E6 Alternate washing system malfunction E7 E8 E9Turbine flow-regulatormalfunction Water intake system malfunction Width TECHNICAL DATAWater supply pressure Electrical characteristics Height depending on models Capacity