Contents | Smeg STL 60 specs

CONTENTS

BEFORE USING THE WASHING MACHINE FIRST WASH CYCLE

PRECAUTIONS AND GENERAL

RECOMMENDATIONS

DESCRIPTION OF THE WASHING MACHINE PREPARATION OF THE WASHING DETERGENTS AND ADDITIVES PROGRAMME SELECTION

CLEANING THE FOREIGN BODY TRAP DRAINING RESIDUAL WATER

CARE AND MAINTENANCE

TROUBLESHOOTING GUIDE

AFTER-SALES SERVICE

TRANSPORT AND HANDLING

INSTALLATION

ELECTRICAL CONNECTION

Image 3

Smeg STL 60 manual Contents

Contents

GB STL Programme Chart Half Load button Load Water Energy Approx. ProgrammeIntensive Rinse button One rinse cycle is added to ensure a more intensive rinse Contents Before Using the Washing Machine First Wash Cycle Precautions and General Recommendations Preparation of the Washing Description of the Washing Machine Loading the laundry Choice of the right detergents and additives Detergents and AdditivesDosage Filling up with detergents and additives Programme Selection Cleaning the Foreign Body Trap Detergent dispenser Draining Residual Water Plug the washing machine back Water inlet hose filter Washing machine stops during the programme Water inlet hosesWashing machine does not start, no lamp lights up Washing machine does not start, but the pilot lamp is on Water stop fault depending on model Water Stop fault may have been triggered byPump operates Before contacting After-Sales Service SpecifyWait for the water to cool so as to avoid any accidents Removal of transport bracket Connect the water inlet hose Adjust the feet Floor Water stop anti-flooding systemConnect the water drain hose Depending on model Polarized Plugs e.g pin, 13 amp plug conforming to BS 1363A Fuse replacementValid Only For Great Britain And Ireland To fit a new plug, proceed as follows