Instructions for the user
After 10 minutes, the power is automatically reduced. It returns to position 9 and «P» disappears. The interruption of the power function is possible by reducing the intensity of the heat at any moment. The rear cooking zones are able to function on maximum power owing to the subtraction of power from the front ones. In actual fact, whilst the «power» function is active, the front cooking zones will not be able to function at a power level greater than 8 for the front left cooking zone and 7 for the front right cooking zone, even if a higher power level has been selected.
This configuration can be seen by means of «9» which flashes at the same time as «8» (for the front left plate) or «7» (for the front right plate) whilst the power function is active.
For this reason, the power function has priority over the heat accelerator.
If a pan is removed from the cooking zone whilst the power function is on, the function is stopped.
OVEN THERMOSTAT KNOB
Selection of cooking temperature is carried out by turning the knob clockwise to the required temperature, between 50° and 275°C.
As the appliance has an electric oven, the warning light will come on when the oven is heating up. When it goes out it means that the required temperature has been reached. Regular flashing means that oven temperature is being constantly maintained at the programmed level.
VARIABLE GRILL KNOB
Position the oven function knob on the symbol 
or 
. Turn the variable grill knob clockwise to the desired position.
This allows you to vary the heat intensity when cooking with the grill. The knob can be set with continuity between “0” and the stop release position, which corresponds to maximum heat.
OVEN CONTROL KNOB
Each of the functions listed below can be used (except the oven light and the small grill) only together with the correct temperature thermostat regulation as described on paragraph “OVEN THERMOSTAT KNOB”.
TOP AND BOTTOM ELEMENTS | GRILL ELEMENT + FAN |
GRILL ELEMENT | BOTTOM ELEMENTS + FAN |
GRILL ELEMENT + ROTISSERIE | FAN HEATING ELEMENT |
BOTTOM ELEMENTS | TOP AND BOTTOM ELEMENTS + FAN |
| HEATING ELEMENT |
TOP AND BOTTOM ELEMENTS + FAN | AUTOMATIC CLEANING CYCLE |
| (PYROLYSIS) |
DOOR CLOSURE LIGHT
Whilst the automatic (Pyrolysis) cleaning cycle is on, this light comes on to indicate that the oven door closure device is active.
9
