Where to put detergents and additives
Pour in the detergent:
• Washing powder for prewash and main wash
• Washing powder for main wash without prewash
• Fabric softeners no more than to “MAX” mark.
• Stain removers
• Water softeners (water hardness class 4)
• Starch (dissolved in water; maximum 100 ml) Be careful not to fill more than the “MAX” level mark.
For programmes without prewash and temperatures from cold to 40° C, it is recommended to use liquid detergents to avoid whitish residues on the laundry.
(
)
Using chlorine bleach
•Wash your laundry in the desired programme (Cotton, Synthetics), adding an appropriate amount of chlorine bleach to the SOFTENER chamber (close the lid carefully).
•Immediately after end of programme, start the “Rinse and Spin” programme to eliminate any residual bleach smell; if you want, you can add softener.
•Never put both chlorine bleach and softener into the softener chamber at the same time.
Using starch powder
If you want to use starch powder, proceed as follows:
•Wash your laundry in the desired wash programme.
•Prepare the starch solution according to the starch manufacturer’s instructions.
•Fill the prepared starch solution (maximum 100 ml) into the softener chamber of the detergent dispenser.
•Close the lid and start programme “Rinse and Spin”.
GB 8
