Smith Corona Computer Keyboard manual Changing Settings, Corrections, WordEraser

Position Print Hammer

Correct

	Type Correction
Code
	+ Return
		Reloc

Position Print Hammer

®

WordEraser LineEraser

	Type Correction
Code
	+ Return
		Reloc

Changing Settings

You can change the end of page setting, line spacing, impression control, pitch and number of lines displayed in Type Mode. New settings will replace any existing settings. (See “Page Layout.”)

NOTE: If you change pitch, remember to change the printwheel.

Corrections

The typewriter can automatically correct all characters in a three line correction memory buffer. You can easily correct characters not in the buffer by performing an extra step (see “Off-Line Correction”).

Remember to use Code + , Code + , Code + , Code + , Return, Back Space, and Spacebar when positioning the print hammer to make a correction. If you use the platen knob, the line count may be inaccurate.

IMPORTANT: If you changed printwheels, be sure to insert the proper printwheel before making corrections.

Erasing Character(s) in Correction Memory

1.Position the print hammer on the incorrect character, if necessary, and then press Correct. Hold down to continue erasing characters to the left. Do not use the platen knob to position the print hammer.

2.Type the correction. Be sure to activate Bold or Underscore if you want the replacement text enhanced.

3.Press Code + Reloc (Return) to quickly return to your previous typing position, if necessary.

NOTE: You erase the correction memory buffer when you turn off the typewriter, use the Automatic Paper Insert feature, switch modes, or change pitch.

WordEraser ®

This feature allows you to erase word(s) within the correction memory buffer.

1.Position the print hammer on any character in the incorrect word or on the space to the right of the word. If you are correcting more than one word, position the print hammer on the right-most incorrect word.

2.Press WordEraser once for each incorrect word. The error is erased.

3.Type in the correction. Be sure to activate Bold or Underscore if you want the replacement text enhanced.

4.Press Code + Reloc (Return) to return to your previous typing position, if necessary.

3-6 — Type Mode Smith Corona Corporation