Always wear suitable shoes when using.
All electric appliances emit electromagnetic radiation when in operation. Please do not leave especially
appliances (e.g. mobile telephones) directly next to the cockpit or the electronic controlsystem as otherwise values displayed might be distorted (e.g. pulse measurement).
Instructions for Assembly
Ensure that you have received all the parts required (see check list) and that they are undamaged. Should you have any cause for complaint, please contact your dealer.
Before assembling the equipment, study the drawings carefully and carry out the operations in the order shown by the dia- grams. The correct sequence is given in capital letters.
The equipment must be assembled with due care by an adult person. If in doubt call upon the help of a second person, if possible technically talented.
Please note that there is always a danger of injury when wor- king with tools or doing manual work. Therefore please be ca- reful when assembling this machine.
Ensure that your working area is free of possible sources of danger, for example don’t leave any tools lying around. Al- ways dispose packaging material in such a way that it may not
List of spare parts page 11-12
Example order: Art. no.
of this article, so that it may be used for transport at a later date, if necessary.
Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.) is required, this should be clearly stated on the order by adding the words “with fastening material“.
When ordering spare parts, always state the full article number,
cause any danger. There is always a | risk of suffocation if child- |
ren play with plastic bags! |
|
The fastening material required for each assembly step is sho- wn in the diagram inset. Use the fastening material exactly as instructed. The required tools are supplied with the equipment.
Bolt all the parts together loosely at rst, and check that they have been assembled correctly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts completely against resistance (locking device). Then check that all screw connections have been tightened rmly. Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be repla- ced.
For technical reasons, we reserve the right to carry out preli- minary assembly work (e.g. addition of tubing plugs).
Waste Disposal
SMOOTH products are recyclable. At the end of its useful life please dispose of this article correctly and safely (local refuse sites).
Example of label - Serial number
|
|
|
|
|
|
|
|
|
|
|
|
| Serial |
|
|
|
|
|
|
|
|
|
|
|
|
| Number |
| Trainingsgerat nach DIN |
| DIN EN 957 Teil 1/5 | ||||||||||
| Klasse: HA |
|
|
|
|
|
|
|
|
| |||
| Fur therapeutische Zwecke geignet | ||||||||||||
| Typ |
|
| 368a |
| Baujahr | |||||||
| Kontroll Nr. 218 |
|
| max. Belastung 150 kg | |||||||||
| Made in Germany |
|
|
| 101 |
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 | 2 | 3 | 4 | 5 |
3
