Assembly Instructions

Please, thoroughly read these instructions prior to assembly and first use. You will get important information about your safety as well as the use and maintenance of your Cross-Trainer. Keep these instructions for reference and/or for maintenance work or spare parts orders.

For Your Safety

Only use the Cross-Trainer for its intended purpose, i.e. for the physical training of adult persons.

Any other use is inadmissible and may be dangerous. The ma- nufacturer cannot be made liable for damage caused by a use that does not correspond with the intended purpose.

You train with an equipment that has been designed in accor- dance with the latest state of the art regarding safety. Possible danger spots that may cause injuries have been avoided and safeguarded as well as possible.

The unit requires a power supply of 110 V/60 Hz. It should be connected only to a safety socket with a single 10-A fuse. Be- fore commissioning the appliance pay attention to the fact that the correct plug-in power supply unit (observe marking) has been connected properly. Do not under any circumstances carry out electrical repairs or alterations yourself. Always en- sure that such work is done by a properly qualified electrician.

Important: disconnect the apparatus from the mains before doing repair, maintenance or cleaning work.

The equipment must be set up on firm even ground. Ensure that the power cable is not pinched and that no-one can trip over it.

Improper repairs and design changes (disassembly of original parts, installation of inadmissible parts, etc.) may cause ha- zards for the user. Do not under any circumstances carry out el- ectrical repairs or alterations yourself. Always ensure that such work is done by a properly qualified electrician.

When the unit is not in use, unplug it from the power supply.

Never allow liquid of any kind to enter the interior of the unit.

Defective parts may impair your safety and the service life of your equipment. Therefore, please exchange defective or worn parts immediately.

Always observe the general safety rules and precautions for working with electrical equipment.

To ensure that the safety level is kept to the highest possible standard, determined by its construction, this product should be serviced regulary (once a year) by specialist retailers.

If you have any doubt or any queries, please contact your spe- cialised dealer.

If the equipment is in regular use, check all its components thoroughly every 1 -2 months. Pay particular attention to the tightness of bolts and nuts. This is particularly true for the attachment of grip strap, running plate and fastening of the handlebar and front tube.

Inform present persons (especially children) about possible ha- zards during your exercises.

Prior to taking up training, have your family doctor check whether your state of health is sufficient to train with this equip- ment. The medical findings should be the basis for the build-up or your training program. Wrong or excessive training may lead to damage to your health.

By all means observe the information about the organization of training in the training instructions.

Any interference with parts of the product that are not descri- bed within the manual may cause damage, or endanger the person using this machine. Extensive repairs must only be car- ried out by special service staff or qualified personnel.

Our products are subject to a constant innovative quality assu- rance. We reserve the right to perform technical changes re- sulting therefrom.

In choosing the location of the apparatus, ensure a sufficient sa- fety distance from any obstacles. The apparatus must not be mounted in the immediate vicinity of main passageways (paths, doorways, corridors).

The product is not suitable for use by persons weighing over 150 kg.

Handling the equipment

Before using the equipment for exercise, check carefully to en- sure that it has been correctly assembled.

Before beginning your first training session, familiarize yourself thoroughly with all the functions and settings of the unit.

It is not recommended to use or store the apparatus in a damp room as this may cause it to rust. Please ensure that no part of the machine comes in contact with liquids (drinks, perspiration etc.). This may cause corrosion.

The machine is designed for use by adults and children should not be allowed to play with it. Children at play behave unpre- dictably and dangerous situations may occur for which the ma- nufacturer cannot be held liable. If, in spite of this, children are allowed to use the equipment, ensure that they are instructed in its proper use and supervised accordingly.

The unit complies with class S of the standard EN 957-1/-2-4.

The appliance has undergone Class S (= studio) testing. If the appliance is not intended for domestic use, please note that the onus is on the owner to ensure that the appropriate measures

are put in place with respect to accessibility and supervision. The appliance may only be operated in public places under qualified supervision. The scope of such supervision shall de- pend on who the users are: their degree of reliability, age, ex- perience, etc.

A slight production of noise at the bearing of the centrifugal mass is due to the construction and has no negative effect upon operation. Possibly occurring noise during reverse pedalling re- sult from engineering and are absolutely safe.

Do not use corrosive or abrasive materials to clean the equip- ment. Ensure that such materials are not allowed to pollute the environment.

The crosstrainer has a magnetic brake system.

The equipment is independent of revolutions per minute.

Please ensure that liquids or perspiration never enter the ma- chine or the electronics.

Before use, always check all screws and plug-in connections as well as respective safety devices fit correctly.

2

Page 2
Image 2
Smooth Fitness 07859-999 manual Assembly Instructions, For Your Safety