20
6.45M TREADMILL
ASSEMBLY
STEP 3: Assemble the Upright
(1)Connect the 8Pin Power Wire – Upper (601) to the 8Pin Power Wire – Lower
(602)and the Safety Key Wire – Upper (612) to the Safety Key Wire – Lower
(613).Insert any extra cable length into the Left Upright (209) as shown in FIG 1.
(2)Insert the Left and Right Uprights (209) into the Base Frame (301) and secure by tightening two Fix Bolts (210) as shown in FIG 2. The M10 x 50mm Bolts (105) are preassembled to the Base Frame (301) at the factory.
209
209
C210
301
210
FIG 2
C
209
301 | 209 |
612 601
613 602
301
FIG 1
