7. Press the Esc key on the terminal or PC. The Main Menu
will appear on the screen.
___________________________________________________
>>>> Main Menu <<<<
1. Switch Configuration Menu
2. Port Configuration Menu
3. Statistics Menu
4. Utilities Menu
5. Exit Menus (Password Protect)
Enter Selection:
___________________________________________________
Figure 1-1. Main Menu
You may now set a variety of configuration options, such as full-
duplex mode on the 10BASE-T ports, a password for the
Console interface, and Spanning Tree and Address Aging para-
meters. You may also select various options for monitoring the
performance of the unit out-of-band. These are described in
Chapter 5.
To set up the unit for in-band management via SNMP or Telnet,
continue with Step 8.
QUICK START
1-4