Industrial Temperature Rated USB 2.0
Datasheet
BIT |
|
|
|
NUMBER | BIT NAME |
| DESCRIPTION |
|
|
| |
0 | PORT_PWR | Port Power Switching: Enables power switching on all ports simultaneously | |
|
| (ganged), or port power is individually switched on and off on a port- | |
|
| basis (individual). The ability to support power enabling on a port or ganged | |
|
| basis is hardware implementation dependent. | |
|
| 0 | = Ganged switching (all ports together) |
|
| 1 | = Individual |
|
|
|
|
4.2.1.8Register 07h: Configuration Data Byte 2
BIT |
|
|
NUMBER | BIT NAME | DESCRIPTION |
|
|
|
7 | DYNAMIC | Dynamic Power Enable: Controls the ability of the Hub to automatically |
|
| change from |
|
| power source is removed or is unavailable (and from |
|
| Powered if the local power source is restored). {Note: If the local power |
|
| source is available, the Hub will always switch to |
|
| When Dynamic Power switching is enabled, the Hub detects the availability |
|
| of a local power source by monitoring the external LOCAL_PWR pin. If the |
|
| Hub detects a change in power source availability, the Hub immediately |
|
| disconnects and removes power from all downstream devices and |
|
| disconnects the upstream port. The Hub will then |
|
| port as either a |
|
| Powered Hub (if local power is available). |
|
| 0 = No Dynamic |
|
| 1 = Dynamic |
|
|
|
6 | Reserved | Reserved |
|
|
|
5:4 | OC_TIMER | OverCurrent Timer: Over Current Timer delay. |
|
| 00 = 0.1ms |
|
| 01 = 4ms |
|
| 10 = 8ms |
|
| 11 = 16ms |
|
|
|
3 | COMPOUND | Compound Device: Allows the OEM to indicate that the Hub is part |
|
| of a compound (see the USB Specification for definition) device. The |
|
| applicable port(s) must also be defined as having a |
|
| Device". |
|
| Note: When configured via strapping options, declaring a port as |
|
| |
|
| it is part of a compound device. |
|
| 0 = No |
|
| 1 = Yes, Hub is part of a compound device |
|
|
|
2:0 | Reserved | Reserved |
|
|
|
SMSC USB2512i | 17 | Revision 1.92 |
| DATASHEET |
|