Snapper 1666-0 Product Specifications, General Maintenance Recommendations, Generator Maintenance

Models: 1666-0

1 40
Download 40 pages 32.38 Kb
Page 10
Image 10
PRODUCT SPECIFICATIONS

Snapper G1000 Generator

PRODUCT SPECIFICATIONS

Generator Specifications

Rated Surge Watts . . . . . . . . . . . . . . . 1,000 Watts Rated Running Watts . . . . . . . . . . . . . 900 Watts Rated Maximum Current

At 120 Volts AC . . . . . . . . . . . . . .7.5 Amps At 12 Volts DC . . . . . . . . . . . . . . .8.3 Amps Phase . . . . . . . . . . . . . . . . . . . . . . . .Single Phase

Rated Frequency . . . . . . . . . . . . . . . .60 Hertz Packaged Weight . . . . . . . . . . . . . . . .61.0 lbs.

Engine Specifications

Model . . . . . . . . . . . . . . . . . . . . . . . . Mitsubishi GM82 Rated Horsepower . . . . . . . . . . . . . . 2.4 at 4000 rpm Displacement . . . . . . . . . . . . . . . . . . . 80cc

Spark Plug Type: . . . . . . . . . . . . . . . . . NGK BP6HS or equivalent

Set Gap To: . . . . . . . . . . . . . . . . . . . . . 0.030inch (0.75mm) Gasoline Capacity . . . . . . . . . . . . . . . 1.2 U.S. gallons (4.5 l)

GENERAL MAINTENANCE RECOMMENDATIONS

The generator warranty does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain generator as instructed in this manual.

Some adjustments will need to be made periodically to properly maintain your generator.

All adjustments in this section should be made at least once each season. Follow the requirements in the “Maintenance Schedule” chart shown below in Figure 11.

NOTE: Once a year you should clean or replace the spark plug and replace the air filter. A new spark plug and clean air filter assure proper fuel-air mixture and help your engine run better and last longer.

GENERATOR

MAINTENANCE

Generator maintenance consists of keeping the unit clean and dry. Operate and store the unit in a clean dry environment where it will not be exposed to excessive dust, dirt, moisture or any corrosive vapors. Cooling air slots in the generator must not become clogged with snow, leaves or any other foreign material.

Figure 11 – Maintenance Schedule

Item

Operation

Each use

First Month or

Every 3 months

Every 6 months

 

 

 

25 hours

or 50 hours

or 100 hours

Engine oil

Check level

X

 

 

 

 

Change

 

X

X

 

Air cleaner

Check

X

 

 

 

 

Clean

 

 

X (1)

 

Spark arrester

Check – Clean

 

 

X (2,3)

 

Spark plug

Check – Clean

 

 

X

 

Valve clearance

Check – Adjust

 

 

 

X (3)

Fuel tank strainer

Clean

 

 

 

X

Fuel line

Check (Replace if

 

Every 3 years (3)

 

 

 

necessary)

 

 

 

 

1 Clean more often under dirty or dusty conditions. Replace air cleaner parts if very dirty. 2 Check every 10 hours or 3 months.

3 These items should be serviced by an authorized dealer, unless the owner has the proper tools and is mechanically proficient.

10

Page 10
Image 10
Snapper 1666-0 Product Specifications, General Maintenance Recommendations, Generator Maintenance, Engine Specifications