Snapper 5500 Watt Generator

USING THE GENERATOR

System Ground

The generator has a system ground that connects the generator frame components to the ground terminals on the AC output receptacles.The system ground is connected to the AC neutral wire (see “Equipment Description”, earlier in this manual).

Special Requirements

There may be Federal or State Occupational Safety and Health Administration (OSHA) regulations, local codes, or ordinances that apply to the intended use of the generator. Please consult a qualified electrician, electrical inspector, or the local agency having jurisdiction.

•In some areas, generators are required to be registered with local utility companies.

•If the generator is used at a construction site, there may be additional regulations which must be observed.

Connecting to a Building’s Electrical System

Connections for standby power to a building’s electrical system must be made by a qualified electrician.The connection must isolate the generator power from utility power, and must comply with all applicable laws and electrical codes.

DANGER

Generator produces powerful voltage.

Failure to isolate generator from power utility can result in death or injury to electric utility workers due to backfeed of electrical energy.

•When using generator for backup power, notify utility company. Use approved transfer equipment to isolate generator from electric utility.

•Use a ground fault circuit interrupter (GFCI) in any damp or highly conductive area, such as metal decking or steel work.

•DO NOT touch bare wires or receptacles.

•DO NOT use generator with electrical cords which are worn, frayed, bare or otherwise damaged.

•DO NOT operate generator in the rain.

•DO NOT handle generator or electrical cords while standing in water, while barefoot, or while hands or feet are wet.

•DO NOT allow unqualified persons or children to operate or service generator.

OPERATING THE

GENERATOR

CAUTION

Exceeding generator’s wattage/amperage capacity can damage generator and/or electrical devices connected to it.

•See “Don’t Overload Generator” on page 11.

•Start generator and let engine stabilize before connecting electrical loads.

•Connect electrical loads in OFF position, then turn ON for operation.

•Turn electrical loads OFF and disconnect from generator before stopping generator.

Starting the Engine

Disconnect all electrical loads from the generator. Use the following start instruction steps by numerical order:

1.Make sure unit is on a level surface.

IMPORTANT: Failure to start and operate unit on a level surface will cause the unit not to start or shut down during operation.

2.Turn the fuel valve to the “On” position (Figure 2).

Figure 2 — Fuel Valve

Fuel Valve is shown in the On position

3.Start engine according to engine owner’s manual.

NOTE: If engine starts after 3 pulls but fails to run, or if unit shuts down during operation, make sure unit is on a level surface and check for proper oil level in crankcase.

This unit may be equipped with a low oil protection device. See engine manual.

8

Page 7 Page 9
Page 8
Image 8
Snapper 1668-0 Using the Generator, Operating Generator, System Ground, Connecting to a Building’s Electrical System
Page 7 Page 9

1668-0 specifications

Snapper 1668-0 is a versatile and powerful outdoor equipment that has garnered attention for its innovative design and exceptional performance. This machine primarily serves as a walk-behind mower, making it ideal for homeowners with medium to large lawns. One of the standout features of the Snapper 1668-0 is its robust engine, which provides reliable starting and efficient cutting power. The machine is equipped with a 166cc OHV engine that delivers strong performance, enabling the mower to easily tackle thick grass and uneven terrain.

The cutting deck of the Snapper 1668-0 measures 21 inches, offering a wide cutting path that allows for efficient mowing while reducing the time spent on lawn maintenance. The durable steel construction of the deck ensures longevity and resistance to wear, while the double ball bearing wheels make maneuverability smooth and effortless.

Another significant feature of the Snapper 1668-0 is its height adjustment capability. Users can select from multiple cutting heights ranging from 1 to 4 inches, allowing for customization based on grass type and desired lawn height. This feature is particularly valuable for maintaining healthy grass, as different conditions may require specific cutting heights.

The Snapper 1668-0 also boasts a versatile side discharge, rear bagging, and mulching options, giving homeowners flexibility in how they choose to manage their grass clippings. The mulching feature is especially beneficial for returning nutrients to the soil, promoting a healthier lawn ecosystem.

In terms of ergonomics, the Snapper 1668-0 is designed with user comfort in mind. The adjustable handle allows for various user heights, and the padded grips enhance comfort during extended use.

Safety features have not been overlooked; the mower is equipped with a safety lever that ensures the engine shuts off when the user releases the handlebar. This feature adds an extra layer of protection, particularly in households with children or pets.

In summary, the Snapper 1668-0 is a powerful and efficient lawnmower that combines robust technology and user-friendly characteristics. Its reliable engine, adjustable cutting heights, and versatile operation make it an excellent choice for anyone seeking to maintain a pristine lawn with ease. Whether you are a seasoned gardener or a novice, the Snapper 1668-0 stands out as a dependable option for lawn care needs.
Top Page Image Contents